Draft

Taper selected planar side faces relative to a neutral plane for molding or release geometry.

Purpose

Taper selected planar side faces relative to a neutral plane for molding or release geometry.

Select planar side faces in Model and choose Modify > Draft.

Select one or more planar side Faces to taper.
Choose a world plane, construction plane, or supported planar face as Neutral Plane.

Defines the stationary reference from which selected faces pivot or taper.

Sets signed taper direction and magnitude from greater than -90 to less than 90 degrees; zero is not accepted.

ƒ Accepts variables and expressions

Apply adds a Draft feature that tapers the selected side faces.

Open Draft in History to change the neutral plane or angle.

Draft fails or tapers the wrong direction.

Use planar side faces, choose a valid neutral plane, reverse the Angle sign, or reduce its magnitude.